Logo
Get Estimate

Furnace Installation Fairfax VA | Get a New Furnace

Licensed Virginia HVAC pros for gas and electric systems


When your old furnace quits, you need furnace installation Fairfax VA homeowners can count on before the first hard freeze. We size, permit, and install Carrier, Trane, and Lennox systems for houses across Fairfax County, from 1920s colonials near downtown to new builds in Fairfax Station. Upfront pricing, same-week scheduling, and a 5-year workmanship warranty on every install.

Close-up of a plumber installing a radiator pipe using specialized tools.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed 22+ Years Trusted in Fairfax

What Our Furnace Installation Includes

Every furnace installation Fairfax VA job we do covers the equipment, the labor, the permit, and the cleanup. Here is what is included in the standard price, and what we quote separately if your home needs it.

New Furnace and Thermostat

We supply and install the furnace you selected, plus a new programmable or smart thermostat wired and configured. Old thermostat and mounting plate are removed and disposed of. We register the manufacturer warranty in your name before we leave.

Permit and Inspection

We pull the Fairfax County mechanical permit and meet the inspector on site. You get the signed permit card for your records. This matters at resale and keeps your homeowner's insurance valid if there is ever a claim.

Gas, Flue, and Condensate Work

New gas connector, sediment trap, and shutoff valve installed to code. Flue and combustion air piped in PVC or metal per manufacturer spec. Condensate routed to an approved drain with a safety switch on the pan.

Load Calculation and Duct Check

Manual J load calculation and static pressure test before equipment selection. We check return-air capacity and note any duct repairs needed. Duct modifications are quoted separately so you see the cost before we start.

Haul-Away and Cleanup

Old furnace, thermostat, and packaging removed from your property. Drop cloths on floors and stairs, and a full sweep of the work area. We test the system in heat mode and confirm temperature rise is within spec before we call it done.

First-Year Maintenance Visit

Included at no charge: one heating-season tune-up within 12 months of install. We replace the air filter, check gas pressure, clean the flame sensor, and verify the condensate drain is flowing. Keeps your warranty valid and catches small issues early.

What Furnace Installation Fairfax VA Really Involves


Furnace installation Fairfax VA is the removal of your old heating unit and the code-correct installation of a new gas, electric, or high-efficiency furnace, including the flue, gas line, condensate management, thermostat, and duct connections. It is needed when a furnace cracks its heat exchanger, fails to ignite, or crosses 15 to 22 years of service. A proper install starts with a Manual J load calculation, not a guess based on the old unit's sticker.

Fairfax homes take a beating from January lows that drop into the teens and summer humidity that rusts out heat exchangers from the inside. If your furnace not igniting has become a weekly ritual, or your gas bill jumped $80 a month with no change in habits, replacement usually beats another repair. We handle new furnace installation in Fairfax VA with financing for homeowners who want a Carrier or Rheem system without paying cash up front.

Our Five-Step Furnace Installation Process

From the first phone call to the final combustion test, here is exactly what happens when we install your new furnace in Fairfax.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use on Every Install

Tools & Equipment

Manifold gauge set

Used to set gas pressure and verify inlet and manifold readings against the manufacturer's spec. We do not guess at gas pressure; we measure it and record it on the commissioning sheet.

Multimeter and clamp meter

Used to test igniters, flame sensors, capacitors, contactors, and blower motors. Amp draw on the blower tells us if the motor is failing or if the duct system is too restrictive.

Combustion analyzer

Measures carbon monoxide, oxygen, and temperature rise in the flue. We use it on every startup to confirm the furnace is burning clean and the heat exchanger is sealed.

Tube cutter and flaring tool

Used for clean copper tubing cuts and flares on gas lines and condensate routing. A square cut and proper flare prevent leaks that a hacksaw and tape would hide for a year.

Vacuum pump and recovery machine

When we replace a matched AC coil with the furnace, we recover refrigerant per EPA rules and pull a deep vacuum before charging. No shortcuts on the refrigeration side.

Psychrometer

Measures wet-bulb and dry-bulb temperatures to verify airflow and system performance. It confirms the blower is moving the CFM the Manual J called for.

Methods & Standards

Manual J load calculation

We measure windows, insulation, ceiling height, and orientation room by room, then calculate the actual BTU load. This is how we avoid oversizing, which is the number one cause of short cycling and premature blower motor failure in Fairfax homes.

ACCA quality standards

Our install process follows ACCA 5 QI protocols for equipment selection, duct design, and commissioning. That means documented static pressure, verified temperature rise, and a combustion test on every job, not just the ones that need it.

Virginia Uniform Statewide Building Code

We install to the current Virginia code for gas piping, flue clearances, combustion air, and condensate disposal. Fairfax County inspects our work, and we meet the inspector on site so there are no surprises.

AHRI-matched systems

When we pair a furnace with a new AC coil, we select an AHRI-certified match. That keeps the manufacturer warranty intact and gives you the rated efficiency instead of a number on a brochure.

When Fairfax Homeowners Call Us

01

A 1990s furnace in a Fairfax Station colonial fails inspection during a home sale.

What we do: We assess the heat exchanger, document the failure, and provide a written quote for a code-compliant replacement. We pull the permit and coordinate with the buyer's agent so closing is not delayed.

→ New 96% furnace installed in two days, permit card delivered to the title company, and the sale closes on schedule.

02

A Vienna homeowner wants to replace the furnace and AC at the same time to save on labor.

What we do: We quote a matched Carrier furnace and coil, handle the refrigerant recovery with EPA Section 608 procedures, and install both in a single two-day visit. One permit covers the whole job.

→ New heating and cooling for less than two separate installs, with a single warranty registration and one maintenance plan.

03

A Centreville townhome has a furnace in a closet with no room for a standard unit.

What we do: We measure the closet, select a compact two-stage furnace that fits the space, and reconfigure the flue and condensate routing to meet code. We use a low-profile media cabinet to keep filter changes easy.

→ Efficient heat in a tight footprint, with the closet door closing flush and the condensate draining correctly.

04

An Annandale homeowner needs new furnace installation in Fairfax VA with financing before winter.

What we do: We run the load calc, present three equipment tiers with monthly payment options, and process the financing application during the visit. Install is scheduled within the week.

→ New Rheem furnace installed before the first freeze, with a monthly payment lower than the old emergency repair bills.

How Furnace Installation Runs in Fairfax

Fairfax sits in a mixed-humid climate, which means our furnaces work hard in January and sit idle in July. That swing is why we see so many cracked heat exchangers in 15- to 20-year-old units around Fairfax County. Housing stock ranges from 1940s bungalows in Falls Church with original ductwork to new construction in Chantilly with tight envelopes and right-sized equipment. We size each one differently. A 2,000 sq ft colonial near downtown Fairfax may need 80,000 BTU, while a new townhome in Centreville might need only 45,000. We pull Fairfax County mechanical permits on every job and install to the Virginia Uniform Statewide Building Code. If you are comparing energy efficient furnace installation Fairfax VA options, ask for the AFUE rating and the AHRI certificate, not just the brand name. We also check the condensate drain routing carefully because Fairfax basements flood when a PVC line clogs in February.

Neighborhoods We Serve

  • Fairfax City

    Older homes near downtown often have undersized returns and original 1960s ductwork. We frequently add a return-air drop during furnace replacement to fix cold upstairs bedrooms.

  • Fairfax Station

    Larger colonials on wooded lots deal with long duct runs and higher static pressure. We measure static pressure on every estimate and quote duct improvements when needed.

  • Vienna

    Many Vienna homes have furnaces in tight closets or crawlspaces. We select compact two-stage units and reconfigure flue and condensate routing to fit the space and meet code.

  • Centreville

    Newer townhomes with right-sized equipment and sealed envelopes. We run a full Manual J because matching the old BTU sticker would oversize the new furnace.

Local Conditions We Plan For

  • January lows dropping into the teens

    Furnaces run near continuous duty during cold snaps, which exposes undersized returns and failing blower motors. We verify static pressure and amp draw so the new unit can handle a Fairfax cold snap without tripping limits.

  • Mixed-humid summers with high indoor humidity

    Condensate lines clog and overflow when humidity is high. We install a safety switch on the pan and route PVC condensate to an approved drain so a clog does not shut down the furnace in January.

  • Older housing stock with original ductwork

    Crushed or undersized ducts force the blower to work harder and shorten its life. We inspect accessible duct runs during the estimate and quote repairs before install so the new furnace performs as rated.

  • Fairfax County mechanical permit and inspection

    Every install is permitted and inspected. We schedule the inspection and meet the inspector on site, which keeps your homeowner's insurance valid and avoids issues at resale.

1998 Furnace Replaced in Fairfax Station

Before

A 1998 single-stage 80% furnace with a cracked heat exchanger and a gas bill that had climbed $90 over two winters. Upstairs bedrooms stayed at 62F on cold nights, and the homeowner was running two space heaters.

After

New Trane two-stage 96% furnace with a matched blower and a new return-air drop. Upstairs now holds 70F on a 20F night, and the first full-month gas bill dropped $74 compared to the same month the prior year.

Maintenance: Replace the MERV 11 filter every 90 days and schedule the included annual tune-up each fall. Keep the condensate drain clear and the return grilles unobstructed.

Before

A 2004 Goodman furnace in a closet with a failing blower motor and a tripped breaker every few days. The homeowner had spent $680 on repairs in 18 months and was facing another $900 for a motor replacement.

After

New compact Rheem two-stage furnace installed in the same closet with a low-profile media cabinet. Breaker trips stopped immediately, and the homeowner financed the job for less than the cost of the last two repairs combined.

Maintenance: Check the closet louver for dust every season and change the media filter twice a year. Keep the area around the furnace clear for combustion air.

Before

A 1996 furnace and R-22 air conditioner both on their last legs. The AC not cooling was a refrigerant leak, and the furnace short-cycled because it was oversized for the duct system. Two separate contractors had quoted replacements without measuring the house.

After

New Carrier 96% furnace and AHRI-matched R-410A coil installed in two days. Manual J confirmed 60,000 BTU instead of the 100,000 BTU unit that was there. Static pressure dropped from 0.9 to 0.55 inches of water column, and the house heats evenly for the first time.

Maintenance: Annual heating tune-up and AC coil cleaning each spring. Replace the filter monthly during heavy use and keep the outdoor unit clear of leaves.

Heating Problems We Solve in Fairfax

Most furnace replacements start with a symptom the homeowner has been living with for months. Here are the ones we see most often in Fairfax County and what we do about them.

Problem

Furnace not igniting on cold mornings

A failed igniter or dirty flame sensor leaves you without heat when you need it most. Repeated no-heat calls add up, and a cracked heat exchanger can leak carbon monoxide into the home.

Our Fix

We test the igniter, flame sensor, and gas valve. If the heat exchanger is sound, we repair the ignition system the same day. If it is cracked, we quote a new furnace installation Fairfax VA with financing and bring temporary heat until install day.

Problem

Gas bill climbing every winter

An 80% furnace that short-cycles because it is oversized wastes 15% to 25% of the gas it burns. Over a Fairfax winter, that is $200 or more out the flue.

Our Fix

We run a Manual J load calculation to confirm the right size, then install a two-stage or modulating furnace with a properly matched blower. Correct sizing and a clean duct system usually cut the gas bill by 20%.

Problem

Cold rooms and uneven heat

Bedrooms over the garage or at the end of a long duct run never reach temperature. Homeowners run space heaters, which trip breakers and raise electric bills.

Our Fix

We measure static pressure and inspect the duct system during the estimate. If a return is undersized or a run is crushed, we quote the repair alongside the new furnace. Balancing dampers and correct blower speed finish the job.

Problem

Furnace tripping the breaker

A failing blower motor or shorted control board will trip the breaker repeatedly. Ignoring it can burn out the board and leave you with a no-heat call in January.

Our Fix

We test the blower motor, capacitor, and control board with a multimeter and clamp meter. If the furnace is under 12 years old, we repair it. If it is older and parts are on backorder, we install a new unit and finance it.

Why Fairfax Homeowners Replace Now

Why Fairfax Homeowners Replace Now

A new furnace is not just a box in the basement. It changes your winter, your gas bill, and how fast your house recovers heat after a cold snap. Here is what a correctly sized system delivers.

  • Lower Winter Gas Bills

    A 96% AFUE two-stage furnace burns roughly 20% less gas than the 80% single-stage unit it replaces. For a 2,200 sq ft Fairfax home, that is about $180 to $260 saved per heating season at current Virginia rates. We set the blower speed and static pressure so the savings actually show up on your Washington Gas bill.

  • Heat That Reaches Every Room

    Cold bedrooms over the garage are usually a duct and sizing problem, not a furnace problem. We run a Manual J load calc, verify return-air capacity, and balance dampers so the upstairs bedroom hits 70F on a 22F night. No more space heaters tripping the breaker at 2 a.m.

  • Fewer Mid-Winter Breakdowns

    New igniters, flame sensors, capacitors, and blower motors mean no 3 a.m. no-heat calls. We install surge protection on the control board and a media cabinet with a MERV 11 air filter, which is the single biggest cause of blower motor failure we see in Fairfax County.

  • Warranty and Code Coverage

    Every furnace installation Fairfax VA job we finish is permitted through Fairfax County, inspected, and registered with the manufacturer. You get the full 10-year parts warranty plus our 5-year workmanship warranty. If a flue joint leaks or a condensate line clogs, we come back at no charge.

Licensed, Certified, and Local

Licensed & Certified

  • NATE certification — issued by North American Technician Excellence
  • EPA Section 608 certification — issued by U.S. Environmental Protection Agency
  • Virginia HVAC license — issued by Virginia Department of Professional and Occupational Regulation
  • OSHA safety compliance — issued by Occupational Safety and Health Administration
  • ACCA quality standards — issued by Air Conditioning Contractors of America

Verified Reviews

Google ★★★★★4.9

Installed a new Carrier furnace in our Fairfax Station home in two days. They pulled the permit, cleaned up, and the upstairs is finally warm. The gas bill dropped $74 the first month. Straight answers from the estimate through the walkthrough.

Yelp ★★★★★4.8

We had three quotes for furnace replacement and installation. These were the only ones who measured the house. They found a crushed return duct and fixed it during the install. No pressure, no upsell, and the price matched the quote exactly.

BBB ★★★★★4.9

Our furnace died on a Friday night in January. They brought temporary heat the same night and installed a new Rheem system on Monday. Financing made the monthly payment less than what we were spending on space heaters and emergency repairs.

22 Years Installing Furnaces in Fairfax

Fairfax HVAC Experts has been installing and servicing heating systems since 2004. That is 22 years of Virginia winters, county inspections, and equipment changes. Our technicians hold NATE certification and EPA Section 608 certification, and we work to ACCA quality standards on every load calculation and duct design. We have installed thousands of furnaces across Fairfax County, from Falls Church bungalows to Centreville townhomes, and we know what fails here and why.

  • NATE-certified technicians on every install, not subcontractors
  • EPA Section 608 certification for refrigerant handling on matched coil jobs
  • Virginia HVAC license and full insurance on every crew
  • Factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, and Bryant equipment
  • 22 years serving Fairfax County with a 5-year workmanship warranty
Get Started Today
22 Years Installing Furnaces in Fairfax

What Fairfax Neighbors Say

Real experiences from customers who chose our Furnace Installation services.

“Our 1998 furnace finally cracked its heat exchanger in November. Fairfax HVAC Experts came out the next morning, ran a load calc, and had a new Trane two-stage unit in by the following Wednesday. They pulled the permit, cleaned up everything, and the upstairs bedroom is finally warm. Gas bill dropped about $70 the first month.”

D

Dave R.

Homeowner, Fairfax Station

“We got three quotes for furnace replacement and installation. These guys were the only ones who actually measured the house instead of matching the old BTU sticker. They found a crushed return duct behind the drywall and fixed it. Install took two days, and they left the basement cleaner than they found it.”

P

Priya M.

Homeowner, Vienna

“Furnace died on a Friday night in January. They brought temporary heat the same night and installed a new Carrier 96% system on Monday. Financing made the monthly payment less than what we were spending on space heaters and emergency repairs. Straight answers, no upsell.”

T

Tom K.

Homeowner, Centreville

Furnace Installation Questions Fairfax Homeowners Ask

Real answers to the questions we hear most often from local homeowners and property managers.

How much does furnace installation cost in Fairfax VA?
Most full furnace installations in Fairfax run $4,200 to $8,900 in 2026, including equipment, labor, permit, and haul-away. A basic 80% single-stage furnace for a smaller townhome sits near the low end. A 96% two-stage variable-speed system with new flue piping and a media filter lands at the high end. Duct repairs, new gas lines, or a matched AC coil add cost.
What size furnace do I need in Fairfax VA?
Size comes from a Manual J load calculation, not square footage alone. A 2,000 sq ft Fairfax colonial with average insulation usually needs 60,000 to 80,000 BTU output. Tight new construction in Chantilly may need only 45,000 BTU. Oversizing causes short cycling, higher gas bills, and premature blower motor failure. We measure windows, insulation, and duct capacity before recommending.
How long does furnace installation take in Fairfax VA?
A straight swap takes one long day, usually 8 to 10 hours. If we are rerouting the flue, adding a condensate pump, or replacing a section of duct, plan on two days. We schedule most installs on weekdays and can work Saturdays when the schedule allows. Temporary heat is provided if your old system is already down.
Do you offer financing for furnace installation in Fairfax VA?
Yes. We offer new furnace installation in Fairfax VA with financing through approved lenders, including 0% promotional plans for 12 to 18 months and longer terms up to 10 years. Approval usually takes a few minutes online or by phone. We will show you the monthly payment next to the cash price so you can compare.

Get Your Furnace Installation Fairfax VA Quote Today

We answer the phone, show up on time, and give you a written price before any work starts. Call now and we will schedule your in-home assessment this week. Licensed, insured, and 22 years in Fairfax County.

Call Now Schedule Free Estimate

Call Fairfax HVAC Experts

Reach us at +1 (571) 760-4715 any time, day or night. Our office is open Monday through Friday from 8 a.m. to 6 p.m., and emergency dispatch runs 24/7. Most calls placed before noon get a same-day visit.

Fairfax HVAC Experts


  • Phone

    +15717604715
  • Address

    14500 Chronical Dr, Fairfax, VA 22030

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call +15717604715 Get Quote
Call Quote